Seal Integrity Tester LT-SIT101

Seal Integrity Tester LT-SIT101

Labtro Seal Integrity Tester LT-SIT101 operates by securing the package or test specimen in the appropriate fixture and applying controlled positive internal pressure through the gas injection head. The operator selects the required test mode, such as burst, creep, creep-to-failure, pressure-holding, or gross-leak testing, and presets the required pressure and test time. A high-precision electronic flow controller regulates the gas flow while the embedded microcomputer continuously monitors the test process. Real-time pressure values and test curves are displayed on the 7-inch touchscreen during operation. Depending on the selected mode, the system determines the package response to increasing or sustained pressure, including seal failure, leakage, or burst conditions. Test results are automatically evaluated and can be stored in the internal memory, printed, or transmitted to a connected PC through the RS-232 interface.

Catalog

Qty:

$ 8,250.00

Specifications

Test Principle Positive-pressure internal pressurization
Test Method Internal pressure / bubble test
Primary Test Item Package seal integrity and gross leak evaluation
Standard Test Range 0 to 600 kPa / 0 to 87 psi
Low-Pressure Test Range 0 to 10 kPa / 0 to 1.45 psi
Optional High-Pressure Range 0 to 1.6 MPa / 0 to 232.1 psi
Maximum Optional Pressure 1.6 MPa
Test Modes Burst, Creep, Creep-to-Failure, Pressure Maintaining, Gross Leak
Customized Test Mode Customized Test Mode
Distension Test Type Restrained and unrestrained distension tests
Burst Test Supported
Creep Test Supported
Creep-to-Failure Test Supported
Gross Leak Test Supported
Pressure Holding Test Supported
Gross Leak Detection Method Positive-pressure bubble method
Pressure Setting Presettable
Test Time Setting Presettable
Pressure / Gas Control High-precision electronic flow controller
Load Cells 2
Load Cell Selection Free selection according to test range
Controller Embedded high-speed microcomputer
Display 7-inch HD LCD
Operation Touchscreen interface
Real-Time Monitoring Displays test data and test curves in real time
Test Curve Display Supported
Result Determination Automatic
Data Storage Up to 50,000 test records
Data Printing Supported
Printer Micro-printer
Communication Interface RS-232
PC Connectivity Supported
Data Transmission RS-232 data transmission to PC
Professional Software Optional
Communication Cable Optional
Gas Injection Head Φ10 mm standard
Optional Gas Injection Heads Φ4 mm, Φ1.6 mm
Gas Supply Pressure 0.4 to 0.7 MPa
Gas Supply External gas supply required
Gas Port Φ8 mm PU tubing
Test Frame Height-adjustable
Filling Head Height-adjustable
Over-Pressure Protection Supported
Power-Down Memory Supported
Energy Consumption Low-energy design
Standard Specimen Medical device packaging
Applicable Samples Packaging bags, boxes, bottles, blister packs, flexible tubes, closures, inflated packages, aerosol valves
Instrument Dimensions 310 × 370 × 150 mm
Pedestal Dimensions 305 × 356 × 325 mm
Net Weight 25 kg
Power Supply AC 220 V, 50 Hz / AC 110 V, 60 Hz
Standard Configuration Main Instrument

Features

  • Positive-pressure testing system
    ↳ Evaluates package sealing performance through controlled internal pressurization
    Multi-mode testing
    ↳ Supports burst, creep, creep-to-failure, pressure-holding, and gross-leak tests
    7-inch HD touchscreen
    ↳ Displays test parameters, real-time data, and pressure curves clearly
    High-precision electronic flow control
    ↳ Provides accurate and stable regulation of test pressure
    Dual load-cell design
    ↳ Extends measurement capability across different testing ranges
    Large data storage
    ↳ Stores up to 50,000 test records for traceability
    RS-232 connectivity
    ↳ Enables PC connection and test-data transmission
    Automatic result determination
    ↳ Evaluates and records results after each programmed test cycle
    Over-pressure protection and power-down memory
    ↳ Improves operational safety and preserves test settings

Standard Accessories

  • Standard AccessoryDual Load Cell
    Standard AccessoryTest Frame
    Standard AccessoryMicro-printer
    Standard AccessoryGross Leak Test Fixture
    Standard AccessoryΦ10 mm Gas Injection Head

Optional Accessories

  • Optional ConfigurationProfessional Software
    Optional ConfigurationCommunication Cable
    Optional Fixture Closed Package Restrained Test Fixture
    Optional Fixture Open Package Unrestrained Test Fixture
    Optional Fixture Plastic Pilfer-Proof Closure Test Fixture
    Optional FixtureFlexible Tube Test Fixture
    Optional Fixture Aerosol Valve Seal-Performance Fixture
    Optional Fixture Blister-Pack Seal-Performance Test Device
    Optional AccessoryΦ4 mm Gas Injection Head
    Optional AccessoryΦ1.6 mm Gas Injection Head
    Optional Pressure Configuration High-pressure range up to 1.6 MPa

Application

  • Packaging Bags & Boxes → Perform burst-strength, creep, creep-to-failure, and pressure-holding tests
  • Gross Leak Testing → Detect package leakage using controlled positive-pressure testing
  • Pilfer-Proof Closures → Evaluate sealing performance of plastic closure systems
  • Three-Side-Sealed Packaging → Assess seal integrity of bags with three sealed sides and one open side
  • Medical Blister Packs → Test compression resistance and package sealing performance
  • Flexible Tubes → Evaluate seal performance of toothpaste, cosmetic, food, and medical cream tubes
  • Aerosol Valves → Test sealing performance of aerosol spray packaging and valve systems
  • Medical Packaging → Verify seal integrity, burst resistance, and leakproofness of medical-device packages
  • Pharmaceutical Packaging → Assess sealing performance and package integrity during quality-control testing
  • Packaging Quality Control → Support routine evaluation of seal strength, leakage, and pressure resistance

Expert Help Desk