Hover to Zoom

Biological Safety Cabinet Class II A2 LT-BSC207

Name: Biological Safety Cabinet Class II A2 LT-BSC207
Brand: Labtro Scientific
SKU: LT-BSC207
Price: 3850.00 USD
Availability: InStock
Rating: 4.8 (693 reviews)

Product Code: LT-BSC207

Labtro Biological Safety Cabinet Class II A2 LT-BSC207 draws room air inward through the front opening to create an air barrier that helps protect the operator from aerosols and contaminants generated inside the work zone. The incoming air mixes with internally recirculated air and is passed through the U15 ULPA downflow filter, which supplies clean vertical laminar airflow over the work surface to protect the samples. Approximately 70% of the filtered air is recirculated back through the cabinet, while the remaining 30% is discharged through a separate ULPA exhaust filter to protect the surrounding environment. An EC brushless motor with closed-loop airflow control continuously adjusts fan output to compensate for increasing filter resistance and maintain the specified inflow and downflow velocities. Integrated sensors monitor airflow, filter pressure, sash position, and fan performance, while the touchscreen displays operating conditions and activates audible and visual alarms if parameters move outside safe limits. After operation, the programmable 254 nm UV lamp can be used for work-zone decontamination when the cabinet is not in active use.

Key Features

Class II Type A2 protection system
↳ Provides simultaneous personnel, product, and environmental protection

70% recirculation and 30% exhaust
↳ Maintains controlled containment while conserving conditioned laboratory air

Dual U15 ULPA filtration
↳ Independent downflow and exhaust filters provide >99.999% efficiency at 0.1 to 0.3 µm

Closed-loop airflow regulation
↳ EC brushless motor automatically compensates for filter loading to maintain stable airflow

Continuous airflow monitoring
↳ Tracks inflow and downflow velocities with integrated sensors

7-inch color touchscreen
↳ Displays airflow velocity, filter differential pressure, filter life, fan status, sash condition, timers, and alarms

Comprehensive alarm system
↳ Provides audible and visual warnings for airflow deviation, fan failure, sash position, filter blockage, and maintenance requirements

Removable SUS304 worktop
↳ Enables thorough cleaning and decontamination of the work surface and lower plenum

One-piece stainless-steel work chamber
↳ Large-radius corners minimize difficult-to-clean joints and support routine decontamination

10° ergonomic safety-glass sash
↳ Provides comfortable access and clear visibility during operation

Tempered-glass side panels
↳ Improve lateral visibility of the work zone

Programmable 254 nm UV sterilization
↳ Supports work-zone decontamination with sash and fan safety interlocks

Dual waterproof electrical outlets
↳ Allow operation of compatible small laboratory equipment inside the workspace

Height-adjustable support stand
↳ Provides stable and ergonomic cabinet positioning

$ 3,850.00

Qty:

Catalog

Need technical specifications, pricing or application assistance? Contact our product specialists.

Technical Data

Product Specifications

Classification

Class II Type A2

Protection Type

Personnel, Product, and Environmental Protection

Airflow Pattern

70% Recirculation / 30% Exhaust

Airflow Direction

Vertical Laminar Downflow

Exhaust Direction

Top Exhaust

Average Inflow Velocity

0.50 m/s

Average Downflow Velocity

0.33 m/s

Airflow Distribution

Full-area homogeneous vertical downflow

Airflow Regulation

Closed-loop Constant-Air-Volume Regulation

Airflow Compensation

Automatic compensation for filter loading

Airflow Monitoring

Continuous inflow and downflow velocity monitoring

Velocity Sensors

Integrated

Velocity Meter Accuracy

0.001 m/s

Blower / Motor

EC Brushless DC Motor

Downflow Filter

Independent ULPA Filter

Exhaust Filter

Independent ULPA Filter

Filtration Configuration

Dual ULPA Filtration – Downflow and Exhaust

ULPA Classification

U15

Filtration Efficiency

>99.999% at 0.1 to 0.3 µm

Controller

Microprocessor Control System

Display

7-inch Color Capacitive Touchscreen

Displayed Airflow Parameters

Inflow Velocity and Downflow Velocity

Filter Monitoring

Filter Differential Pressure and Filter-Life Monitoring

Fan Monitoring

Fan Operating Status

Sash Monitoring

Front Sash Position / Status

Running-Time Display

Supported

UV Timer Display

Supported

System Information Display

Supported

Alarm Type

Audible and Visual

Inflow Alarm

Inflow Velocity Outside Preset Limit

Downflow Alarm

Downflow Velocity Outside Preset Limit

Fan Alarm

Fan / Blower Failure

Sash Alarm

Sash Position Outside Safe Operating Range

Filter Alarm

Filter Blockage / High Resistance

Filter-Life Alarm

Filter Lifetime / Maintenance Reminder

Work Chamber Material

1.5 mm SUS304 / AISI 304 Stainless Steel

Work Chamber Design

One-piece formed construction with large-radius coved corners

Worktop Material

SUS304 Stainless Steel

Worktop Type

Removable without tools

Worktop Cleaning Access

Allows access to work surface and lower plenum for cleaning/decontamination

Side Panels

Tempered Safety Glass

Front Sash Material

Laminated Shatterproof Safety Glass

Front Sash Design

10° Backward-Slanted Ergonomic Sash

Working Sash Opening

180 mm

Maximum Sash Opening

530 mm

Armrest

Integrated Ergonomic Armrest

Main Body Material

1.2 mm Electro-Galvanized Steel

Surface Treatment

White Oven-Baked Electrostatic Powder-Coated Finish

Chemical Resistance

Resistant to Standard Laboratory Disinfectants

Illumination Type

LED

Standard Illumination

≥700 lux

Enhanced Illumination

≥900 lux configuration available

Lighting Design

Low-heat, shadow-minimized illumination

UV Lamp

254 nm Germicidal UV

UV Lamp Power

30 W

UV Timer

Programmable

UV Safety Interlock

Interlocked with Front Sash and Fan

Internal Electrical Sockets

2 Waterproof / Drip-Proof Sockets

Vibration Level

≤3 µm RMS

Base Stand

Height-Adjustable Support Frame

Power Supply

AC 220 V ±10%, 50/60 Hz

Electrical Requirement

Dedicated Grounded Supply

Maximum Electrical Load

1500 VA

Internal Work Area Dimensions

1300 × 672 × 630 mm

External Dimensions with Base Stand

1480 × 790 × 2080 mm

Net Weight

270 kg

Packing Dimensions

1600 × 1020 × 1740 mm

Gross Weight

302 kg

Performance

Features & Benefits

Class II Type A2 protection system
↳ Provides simultaneous personnel, product, and environmental protection

70% recirculation and 30% exhaust
↳ Maintains controlled containment while conserving conditioned laboratory air

Dual U15 ULPA filtration
↳ Independent downflow and exhaust filters provide >99.999% efficiency at 0.1 to 0.3 µm

Closed-loop airflow regulation
↳ EC brushless motor automatically compensates for filter loading to maintain stable airflow

Continuous airflow monitoring
↳ Tracks inflow and downflow velocities with integrated sensors

7-inch color touchscreen
↳ Displays airflow velocity, filter differential pressure, filter life, fan status, sash condition, timers, and alarms

Comprehensive alarm system
↳ Provides audible and visual warnings for airflow deviation, fan failure, sash position, filter blockage, and maintenance requirements

Removable SUS304 worktop
↳ Enables thorough cleaning and decontamination of the work surface and lower plenum

One-piece stainless-steel work chamber
↳ Large-radius corners minimize difficult-to-clean joints and support routine decontamination

10° ergonomic safety-glass sash
↳ Provides comfortable access and clear visibility during operation

Tempered-glass side panels
↳ Improve lateral visibility of the work zone

Programmable 254 nm UV sterilization
↳ Supports work-zone decontamination with sash and fan safety interlocks

Dual waterproof electrical outlets
↳ Allow operation of compatible small laboratory equipment inside the workspace

Height-adjustable support stand
↳ Provides stable and ergonomic cabinet positioning

Laboratory Uses

Applications

Microbiology Laboratories → Handling microorganisms, cultures, media, and microbiological specimens

Clinical Laboratories → Processing potentially infectious diagnostic and patient samples

Cell Culture Laboratories → Aseptic handling of cells, tissue cultures, and related biological materials

Biotechnology Laboratories → DNA/RNA procedures, hybridization, media preparation, and biological research workflows

Pharmaceutical Laboratories → Microbiological quality control, sterile preparation, and biological sample handling

Hospital Laboratories → Controlled preparation and manipulation of clinical biological specimens

Biomedical Research Laboratories → Procedures requiring personnel, sample, and environmental containment

Quality Control Laboratories → Controlled microbiological testing and aseptic sample processing

Included

Standard Accessories

- Height-Adjustable Base Stand
- Downflow U15 ULPA Filter
- Exhaust U15 ULPA Filter
- 254 nm UV Germicidal Lamp
- LED Illumination Lamp
- 2 Waterproof Internal Electrical Sockets
- 7-inch Touchscreen Controller
- Airflow Velocity Sensors
- Filter Differential-Pressure Monitoring System
- Integrated Armrest
- Power Cord / Electrical Connection

Add-ons